Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Can´t work in console using MP connection

 
SOLVED
Go to solution
uadm26
Super Advisor

Can´t work in console using MP connection

Hi,

I have a Itanium system, and have to ways to connect, IP and serial, I enter in MP, but when I try to login into console by the command CO, theres no login prompt just that line:

------------ Live Console ----------------
And nothing more happens, seems hung up.

Can you help? Thanks.
6 REPLIES 6
Ludovic Derlyn
Esteemed Contributor

Re: Can´t work in console using MP connection

Hi,

I have encountered this problem also on itanium server

- Check if network cable is correct
- Halt and restart Servers (power off -power on) seems resolve the problem

An other cases has been posted, check it :

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1034412

regards

L-DERLYN
RAC_1
Honored Contributor

Re: Can´t work in console using MP connection

Login with ip and check if console processes is running or not. If not restart it. init q should start it.

If console process is running, then try resetting GSP. (soft reset should do it.)
There is no substitute to HARDWORK
Geoff Wild
Honored Contributor
Solution

Re: Can´t work in console using MP connection

I think you need to go into the EFI Boot Maintenance Manager, then select the "Console Input Devices".

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
Darrel Louis
Honored Contributor

Re: Can´t work in console using MP connection

Hi Joel,

From the MP console, try type CO and ctrl-E cf.

Can you check the event/log, you need to navigate through the error logs to find errors. You could do this by entering SL (event logs) and CL for console logs.

Darrel
uadm26
Super Advisor

Re: Can´t work in console using MP connection

Thanks for all, but Geoff Wild God bless you.
uadm26
Super Advisor

Re: Can´t work in console using MP connection

thanks for all.