Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot access MP login on RX46460

 
Idham
Frequent Advisor

Cannot access MP login on RX46460

Hi
I'm abble to login to MP console (Ctrl-B) on my rp7420.Bit somehow when using the Ctrl-B on rx4640, nothing come out form the console screem.
Can anyone help????

I already check the getty service on rx4640


camracd0:>ps -ef | grep getty
root 3207 1 0 Jan 12 console 0:00 /usr/sbin/getty console console
root 805 555 0 09:06:42 pts/0 0:00 grep getty
9 REPLIES 9
Torsten.
Acclaimed Contributor

Re: Cannot access MP login on RX46460

Not sure if I understand your situation.

Did you connect to the MP already (serial or over LAN)?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Idham
Frequent Advisor

Re: Cannot access MP login on RX46460

serial monitor
Torsten.
Acclaimed Contributor

Re: Cannot access MP login on RX46460

VGA?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Idham
Frequent Advisor

Re: Cannot access MP login on RX46460

Yes it VGA?...not the old school type serial monitor.
Torsten.
Acclaimed Contributor

Re: Cannot access MP login on RX46460

I'm quite sure your VGA monitor is not the console.

Check the syslog for this.

Example:

# grep Console /var/adm/syslog/syslog.log
Oct 20 22:00:55 myserver vmunix: System Console is on the Built-In Serial Interface

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Torsten.
Acclaimed Contributor

Re: Cannot access MP login on RX46460

To access the MP you must be connected to the MP directly (via serial or telnet/ssh or web).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Idham
Frequent Advisor

Re: Cannot access MP login on RX46460

Dec 16 11:01:36 camappd0 vmunix: System Console is on the ITE


Torsten.
Acclaimed Contributor

Re: Cannot access MP login on RX46460

OK, your console is on VGA (so you cannot access the console from remote), but you need to connect to the MP in order to access it.

From manual:

"Accessing the Management Processor
You can connect to the management processor using the following methods:
- The local serial port using a local terminal
- The remote Customer Service Modem (CSM) port using external modem (dial-up) access, if remote
modem access is configured
- The MP LAN port using the Web interface, telnet, or SSH, if login access through the MP LAN is enabled"

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Idham
Frequent Advisor

Re: Cannot access MP login on RX46460

THanks for the support