Integrity Servers
1753745 Members
4939 Online
108799 Solutions
New Discussion юеВ

Re: Cannot boot from DVD drive

 
isobhi
Occasional Advisor

Re: Cannot boot from DVD drive

Hi

I have only 1 partition.

Regards
Isobhi
Torsten.
Acclaimed Contributor

Re: Cannot boot from DVD drive

It looks to me like only devices connected to cell 0 are listed.

However, please post

Shell> devices

Shell> info all

and from MP

MP:CM> cp

MP:CM> io

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
isobhi
Occasional Advisor

Re: Cannot boot from DVD drive

Hi
attached is the output for the a.m. commands.

the io command from the MP menu does not exist.

regards
isobhi
Torsten.
Acclaimed Contributor

Re: Cannot boot from DVD drive

The primary or default root cell in a single nPartition system is the bottom cell (cell 1).

The internal DVD is per default connected to the core I/O of cell 1.

You have only cell 0, hence the DVD is not connected.


If you plan to reinstall the system, you should consider to swap the cell position.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!