Cant add boot to EFI menu

[Mark Trux]

I have an rx82xx and I cant seem to make the efi menu work for boot.
The system came with 1 Npar. I split the two cell boards off (cell2,3) and created a new partition.
Now I cant get the partition to boot.
I hav read thru the manual a couple of time but I am not seeing wht I am missing.
I need another set of eyes to help me find out what I am not doing correctly.

Thanks


rx8640
HPUX 11v3

Login to MP
co
partition 1
-----------------------
--------------
Cabinet | 0 |
--------+----+
Slot |0123|
--------+----+
Part 0 |**..|
Part 1 |..**|
-----------------------


HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0
SYS LAN 0 Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(001F29
SYS LAN 1 Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(001F
EFI Shell [Built-in]
Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
Boot Option Maintenance Menu


Use ^ and v to change option(s). Use Enter to select an option
Use > and < to view long descriptions
Hot Key: 'S' or 's' to start the EFI Shell

Selected boot option: HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0

Loading.: HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0

Load of HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0 failed: Not Found

Press any key to continue
-----------------------
Add aboot option
Boot from a file
Removable Media Boot [Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Scsi(Pu
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Mac(001F290C195D)]
Load File [Acpi(HWP0002,PNP0A03,206)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,206)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,206)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,206)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20C)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20C)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20C)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20C)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,300)/Pci(1|0)/Mac(001F290C19F1)]
Load File [Acpi(HWP0002,PNP0A03,300)/Pci(2|1)/Scsi(Pun3,Lun0)]
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,20E)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,300)/Pci(1|0)/Mac(001F290C19F1)]
Load File [Acpi(HWP0002,PNP0A03,300)/Pci(2|1)/Scsi(Pun3,Lun0)]
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,306)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30C)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30C)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30C)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30C)/Pci(1|0)/Pci(6|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30E)/Pci(1|0)/Pci(4|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30E)/Pci(1|0)/Pci(4|1)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30E)/Pci(1|0)/Pci(6|0)/Mac(001E0
Load File [Acpi(HWP0002,PNP0A03,30E)/Pci(1|0)/Pci(6|1)/Mac(001E0
Exit
-------------------
blk0:\> search all

Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
Scsi(Pun6,Lun0) HP 146 GST3146855LC HPC8 (320 MBytes/sec)
Scsi(Pun2,Lun0) Optiarc DVD RW AD-5170A 1.32 ( 40 MBytes/sec)
Scsi(Pun6,Lun0) HP 146 GST3146855LC HPC8 (320 MBytes/sec)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
Broadcom NetXtreme Gigabit Ethernet (BCM5703) is detected (PCI-X)
Scsi(Pun6,Lun0) HP 146 GST3146855LC HPC8 (320 MBytes/sec)
Scsi(Pun3,Lun0) HP C7438A ZP76 ( 40 MBytes/sec)
Scsi(Pun6,Lun0) HP 146 GST3146855LC HPC8 (320 MBytes/sec)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
HP PCI-X 2Port 4Gb Fibre Channel Adapter (driver 1.09, firmware 4.00.090)
-----------------------------------
map -v
Device mapping table
blk0 : Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Scsi(Pun6,Lun0)
= Handle 95: DiskIo BlkIo ScsiIo
> \

blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Scsi(Pun2,Lun0)
= Handle 96: DiskIo BlkIo ScsiIo
> \

blk2 : Acpi(HWP0002,PNP0A03,200)/Pci(3|0)/Scsi(Pun6,Lun0)
= Handle 97: DiskIo BlkIo ScsiIo
> \

blk3 : Acpi(HWP0002,PNP0A03,300)/Pci(2|0)/Scsi(Pun6,Lun0)
= Handle C3: DiskIo BlkIo ScsiIo
> \

blk4 : Acpi(HWP0002,PNP0A03,300)/Pci(3|0)/Scsi(Pun6,Lun0)
= Handle C5: DiskIo BlkIo ScsiIo
> \


Shell> bcfg boot dump -v
The boot option list is:
01. Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,SigA7DAA750-221B-11DD-8000-D6217B60E588)/\EFI\HPUX\HPUX.EFI "HP-UX Primary Boot: 0/0/0/2/0.0x6.0x0"
02. Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(001F290C19D7) "SYS LAN 0 Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(1|0)/Mac(001F290C19D7)]"
03. Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(001F290C1961) "SYS LAN 1 Cabinet 0 [Acpi(HWP0002,PNP0A03,100)/Pci(1|0)/Mac(001F290C1961)]"
04. VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9) "EFI Shell [Built-in]"
05. Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0) "Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Scsi(Pun2,Lun0)]"

[Dennis Handly]

>created a new partition.

I assume you've done the obvious and created a whole new filesystems for root, /stand, etc for your new partition? And loaded HP-UX into it?

[Mark Trux]

No I haven't. I was told that the Hard Drives come from the fatory with a base install of HP-UX 11v3

[melvyn burnard]

Well if the drive was NOT one that was installed on delivery, then you will need to install the OS on that disk
Assuming there is I/O connecticivity for thise cells, as that is also not standard

[Mark Trux]

Do you think this would work.
Move cells back to working partition.
Mirror the boot drive to the first drive in the hardware path for each cell.
Create the new partition again and assign the cells.
?

[Dennis Handly]

>Mirror the boot drive to the first drive in the hardware path for each cell.

This sounds overly complicated. What type of mirroring?
It seems you should use ignite to clone the system?

[Mark Trux]

It may be a problem with my efi menu.
I found that the sys lan mac for the partition 0 is the same as the mac for the sys lan presented by the efi menu on partition1.
Part 0
0x001F290C19D7

Part1
(as seen in efi menu)
[(0x001F290C19D7)]

[Torsten.]

Please post from MP

MP:CM> sysrev

this will also tell something about the system config.

[Mark Trux]

Wrong cell board as core