Cell status check?

[file system]

Hi all
Glad to give my thread.
I have serious problem on rx8640
Problem is I have installed fc card to use san disks, but one of fc cards are not shown,
and physical memory has installed cell 1 , but
total memory was not changed, it is same size before installing physical memory,
can you tell me what is the problem.
I have tried to show the memory cell 1 but
only cell 0 is detected and shown.
how can I switch cell 0 to cell 1.
rx8640 box has led cell0,1 which is blinking.
but I think one of my cells is down, maybe cell 1
can you tell me which way total cell status are running ok?

[Luk Vandenbussche]

Have you checked the doc


http://www.docs.hp.com/en/AB297-9001C-en/ch02s08.html#d0e3891

http://www.docs.hp.com/en/AB297-9001C-en/ch01s01.html#bahihbca

[Duncan Edmonstone]

Hi,

Well a good start would be to check that cell is part of the partition.

What's the output of:

parstatus




HTH

Duncan

[whiteknight]

Hi,

There are few command, we usually used.

for example:-
parstatus -P
parstatus -X
parstatus -W
parstatus -B
parstatus -V -b0
parstatus -I


WK

[file system]

Output of parstatus
db:/]parstatus
Note: No action specified. Default behavior is display all.
[Complex]
Complex Name : Complex 01
Complex Capacity
Compute Cabinet (4 cell capable) : 1
Active MP Location : cabinet 0
Original Product Name : server rx8640
Original Serial Number : SGH4651HBA
Current Product Order Number : AB443A
OEM Manufacturer :
Complex Profile Revision : 1.0
The total number of partitions present : 1


[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 4 cell slot 21/0/N+ 6/0/N+ 4/0/N+ - Active

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 2/2/8 8.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Base 4/0/8 8.0/0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell2 Absent - - - - - -
cab0,cell3 Absent - - - - - -

Notes: * = Cell has no interleaved memory.


[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Active yes cab0,cell0 0
cab0,bay0,chassis1 Active yes cab0,cell1 0


[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 2 2 cab0,cell0 Partition 0


[Partition - HyperThread]
Par Num Hyperthreading Enabled Hyperthreading Active
======= ====================== =====================
0 no no
mafdb:/]parstatus
Note: No action specified. Default behavior is display all.
[Complex]
Complex Name : Complex 01
Complex Capacity
Compute Cabinet (4 cell capable) : 1
Active MP Location : cabinet 0
Original Product Name : server rx8640
Original Serial Number : SGH4651HBA
Current Product Order Number : AB443A
OEM Manufacturer :
Complex Profile Revision : 1.0
The total number of partitions present : 1


[Cabinet]
Cabinet I/O Bulk Power Backplane
Blowers Fans Supplies Power Boards
OK/ OK/ OK/ OK/
Cab Failed/ Failed/ Failed/ Failed/
Num Cabinet Type N Status N Status N Status N Status MP
=== ============ ========= ========= ========== ============ ======
0 4 cell slot 21/0/N+ 6/0/N+ 4/0/N+ - Active

Notes: N+ = There are one or more spare items (fans/power supplies).
N = The number of items meets but does not exceed the need.
N- = There are insufficient items to meet the need.
? = The adequacy of the cooling system/power supplies is unknown.
HO = Housekeeping only; The power is in a standby state.
NA = Not Applicable.


[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 Active Core 2/2/8 8.0/0.0 cab0,bay0,chassis0 yes yes 0
cab0,cell1 Active Base 4/0/8 8.0/0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell2 Absent - - - - - -
cab0,cell3 Absent - - - - - -

Notes: * = Cell has no interleaved memory.


[Chassis]
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis0 Active yes cab0,cell0 0
cab0,bay0,chassis1 Active yes cab0,cell1 0


[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 Active 2 2 cab0,cell0 Partition 0


[Partition - HyperThread]
Par Num Hyperthreading Enabled Hyperthreading Active
======= ====================== =====================
0 no no

Is it running Ok all cells?

[Todd McDaniel_1]

Did you run parmodify with options to add the new cell to the host then shutdown -R to modify the Npar?

also, I am assuming that you have the proper drivers loaded for the FC?

[tkc]

depending on the type of fc card you use, i would expect the newer card will need the fcd driver whereas the older ones are using td driver.

[Joelmel Roche]

using parmodify -a to add all 8 cells to
partition 0 and then rebooting (shutdown -R)

[Joelmel Roche]

using parmodify -a to add cells 1 to
partition 0 and then rebooting (shutdown -R)