Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Checking firmware versions

 
Paul McCleary
Honored Contributor

Checking firmware versions

Hi,

We have a an Integrity sx2k SuperDome where we need to check the firmware versions of the fibre HBAs and LAN cards.

I have identified the firmware for the fibre HBAs, but am struggling to determine it for the LAN cards. Any ideas?

The O/S is HPUX 11.23 with OnlineDiag tools installed.

Thanks,

Paul
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Checking firmware versions

Hi Paul,

found in the manual:

"$ lanadmin -x card_info ppa

*********** Version Information ***********
Driver version: B.11.23.05
Firmware version: 12.4.5
Chip version: 0x6PCI-XPCI-X
Sub-System ID: 0x106f (1000Base-SX)
PCI-X Sub-Vendor ID: 0x103c
Board revision: C
Software Key: 6
Engineering Date Code: B-3845"

I'm not aware of any firmware updates for LAN adapters (doesn't mean there are none), but the most important point is to have a current driver installed.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Checking firmware versions

the source of the manual:
http://docs.hp.com/en/J5683-90017/ch03s01.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paul McCleary
Honored Contributor

Re: Checking firmware versions

Hi Torsten,

Unfortunately that brings up a firmware version of N/A??!!

Thanks anyway.