Integrity Servers
1748185 Members
4239 Online
108759 Solutions
New Discussion юеВ

Re: Collecting hardware information for Itanium

 
yc_2
Regular Advisor

Collecting hardware information for Itanium

Hi,

Is there a way to collect what hardware has been installed (eg: number of disks, number of CPU, memory size, NIC cards, SCSI, etc) in an Itanium server running Windows 2003?

Thanks in advance.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Collecting hardware information for Itanium

You can use the system management homepage to collect such information.

I think there is something like cfg2html too.

And last but not least you can use the MP and run the display fru command.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Michal Kapalka (mikap)
Honored Contributor

Re: Collecting hardware information for Itanium

hi,

you could also use SysInfo.

mikap
Prashanth.D.S
Honored Contributor

Re: Collecting hardware information for Itanium

Hi,

From OS i guess HPSReport might help you get that data and you may also collect hardware info from MP

MP:CM>DF == Select All and then D to dump on screen.

Best Regards,
Prashanth