Configuring MP IP Address with the IPF Diagnostics CD

[Miguel Silva Rentes]

Hi everyone,

I'm having difficulties configuring the MP IP Address with the IPF Diagnostics CD. I'm using this CD because I don't have a label on the server that tells me what is the MP DNS name and the previously configured IP for the MP is no longer responding. So, I thought to give a try and set again the IP for the MP card. I don't have a laptop with a serial port and also don't know the MP name, so I can't user arp as well. I have in my possession a CD with IPF Diagnostics version 0909 (September 2009) but I can't find the ilosetup on it. Also, is it possible to obtain the MP MAC Address from the OS? machinfo command doesn't show me that...

The server is a rx2660 Itanium. If you need, I can provide more detail.

I tried to download the latest IPF Diagnostics CD (1103) but I was unable to download it because the instructions are incorrect due to the latest changes in HP sites, and the only thing I could do was to order a package through mail, when I just need to download the release.zip.

Any help would be great.

Regards

[Torsten.]

Download IPF1112 from here:

http://www.hp.com/cgi-bin/bizsupport/wgbu-eula1.pl?Path=ftp://ftp.hp.com/pub/softlib/software12/COL4150/ns-100396-1/IPF1112.zip

scroll down and click agree.

[Miguel Silva Rentes]

Thank you very much Torsten. I downloaded and burned the .iso into a new CD. Can you please tell me now how can I run ilosetup? What is the module under ODE that has this utility?

Regards

[Torsten.]

it is not in ode. look in hp/tools

[Miguel Silva Rentes]

Can you quickly point me out where I have acess to the hp\tools on the IPF main screen? On the server screen where I can select the OS, EFI Shell, etc., I choose "Internal DVD Boot" entry and I then get access to the IPF screen.

Regards

[Torsten.]

go to efi shell, change to the cd

cd fs0:

for eample and continue to

cd hp

cd tools

etc

[Miguel Silva Rentes]

fs4:

cd hp

cd tools

cd ilosetup

Then I do "ilosetup get" and get in return:

"Tool not supported for this platform"

:( What can I do now?

[Torsten.]

strange.

try boot up and use smh.

http://server:2301

[Torsten.]

not sure at the moment if you need a minimumfirmware for this tool.

try to get the version from


efi: info all

[Miguel Silva Rentes]

Is there any specific info to look for?

System Firmware Revision: 4.10 [4631]

BMC Revision: 4.01

Management Processor Revision: E.03.30

Regards