Console is on a Serial Device using RX4640

[naaaa]

Hi


I have an rx 4640 and just when a connect the signal cable i receive the folowing message ( Console is on a Serial Device) and the screen is Blank .pls can anyone help ?


thx

Naaaa

[Joelmel Roche]

Hi Naaaa,

If you want to configure in serial or VGA console mode.

Step 1.
Boot to the EFI Boot Manager Menu.
Use ^ and v to change option(s). Use Enter to select an option

Step 2.
Select : Boot Configuration

Step 3.
Select : Console Configuration

Step 4.
Select : Select Input Console

Step 5.

To select the serial console chose :
Acpi(HWP0002,0)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)

* NOTE * This example is for an rx4640, the hardware paths will differ depending
on the hardware platform.
Some systems have multiple serial ports available depending on the Management
Port (MP) card.
Select the device that has vt100+ in the description, do not assume that the
first device is the correct one.

For VGA / USB keyboard/mouse on the rx4640 :

Acpi(HWP0002,0)/Pci(4|0)

joelmel

[Asif Sharif]

HI Naaa,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1081837

http://docs.hp.com/en/5991-4794/ch04s01.html#cihgcffj

Regards,
Asif Sharif