cancel
Showing results for 
Search instead for 
Did you mean: 

EFI shell

 
nasmel
Frequent Advisor

EFI shell

Hi am new to itanium server

I instaled RHEL on rx4640 by conecting USB keyoard,mouse and monitor.after installation i was able to take the EFI boot manager.

today i tried to connect to the server from my laptop through RS232 cable and i was successfull in that.

but when i removed the Serial cable ,and connected back the monitor and mouse am not getting the EFI window instead its directly going to Linux boot screen .how to get the EFI shell back
1 REPLY 1
kravi75
Occasional Contributor

Re: EFI shell

Hi,

This is due to console behaviour issue. Please check the console input/output/error settings in EFI Boot Configuration Menu and select serial port as input/output to get the EFI Menu.