EFI

[Ignite_2]

Hello,

Can you please advise, how to reinstall EFI? Server when booting doesn't even goes into EFI. I have found FW command on MP, but is there possible to download EFI installation file somewhere?

Thanks in advance.

[Matti_Kurkela · Accepted solution]

EFI is a part of the firmware of an Itanium system. The latest firmware may be downloadable from HP support webpages:
http://www.hp.com/go/support

If this is a large enterprise server with hardware partititioning features, firmware upgrade as a customer action may not be supported. If that is the case, open a hardware support call with HP and let them sort it out.
(If you have a support agreement, now is the time to use it!)

If an Itanium server does not reach EFI, it cannot boot from any media, so installing anything will be difficult. Hardware-level repairs may be necessary to fix this.

MK

[Torsten.]

There is no need to **reinstall** EFI, because it cannot get lost - it's part of the firmware stored in NVRAM.

Where does your server stop? What is the SEL is telling you? What server do you have?

[Ignite_2]

Hi,

thanks for updates.

System hangs with following messages:
2 0 0x0002C3 0x7261765C746C7561 EFI Source Filename (second half)
2 0 0x0002C1 0x00000000000001FF EFI source file line number
3 0 0x0002C8 0x0000000000000000 EFI ASSERT error
2 0 0x0002C2 0x6665645C72676D74 EFI Source Filename (first half)
2 0 0x0002C3 0x7261765C746C7561 EFI Source Filename (second half)
2 0 0x0002C1 0x000000000000030C EFI source file line number
3 0 0x0002C8 0x0000000000000000 EFI ASSERT error
2 0 0x0002C2 0x6C6261697261765C EFI Source Filename (first half)
2 0 0x0002C3 0x6970617261765C65 EFI Source Filename (second half)
2 0 0x0002C1 0x00000000000000F4 EFI source file line number

EFI detected invalid value when validating SysMode

It's rx4640. It there some way how to fix it from MP?

[rick jones]

As Matti suggests, hardware-level repair options might be required. Before you get to that though, you might look at the docs for the rx4640 which may still be at docs.hp.com. What I'm wondering if possible would be to go-in and boot from the alternate system firmware to allow you to get far enough to perform another firmware update. Of course if the nvram in which the bits are stored is hardfailed, even that won't provide much joy.

[Torsten.]

"...boot from the alternate system firmware..."

Not with this server model. There is none.

More MP logs may probably tell more about this problem.

I suggest to contact HP support.