Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware revision of rx8640

 
SOLVED
Go to solution
R.O.
Esteemed Contributor

Firmware revision of rx8640

Hi,

With "machinfo" I see:

Firmware info:
Firmware revision = 9.048

¿What is the latest firmware revision for a rx8640 running HP-UX 11.23 ia64? ¿Where I can check it?

Regards,
"When you look into an abyss, the abyss also looks into you"
4 REPLIES 4
James R. Ferguson
Acclaimed Contributor

Re: Firmware revision of rx8640

Hi:

See:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1844072&prodTypeId=15351&prodSeriesId=1844071&swLang=13&taskId=135&swEnvOID=2080

From the ITRC home page -> Download Drivers, Software & Firmware (on the left) -> Servers -> HP Integrity Servers -> rx8640 -> HP-UX 11.23

Regards!

...JRF...
R.O.
Esteemed Contributor

Re: Firmware revision of rx8640

Hi,

Yes, I already check that page, but there, in "Firmware - System", is the version "4.1", Are the same thing these versions "9.048" and "4.1"?

Regards,
"When you look into an abyss, the abyss also looks into you"
Torsten.
Acclaimed Contributor

Re: Firmware revision of rx8640

Please go to MP

MP:CM> sysrev

and compare with the release notes.


The machinfo list the system firmware itself, but this is only a part of the complete bundle, the bundle is called 4.1.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor
Solution

Re: Firmware revision of rx8640

IPF_FW 9.048 is part of the 4.1 bundle.




From release notes:

MP:CM> sysrev

Cabinet firmware revision report

PROGRAMMABLE HARDWARE :

System Backplane : GPM EMMUX
----------- -----------
001.002.000 001.000.000

IO Backplane : IO_LPM_E-0 IO_LPM_E-1
----------- -----------
002.003.000 002.003.000

Core IO : CIO-0 CIO-1
----------- -----------
001.002.000 001.002.000

CELL_LPM CELL_JTAG CELL_PDH
----------- ----------- -----------
Cell 0 : 001.002.000 001.002.000 001.005.001
Cell 1 : 001.002.000 001.002.000 001.005.001
Cell 2 : 001.002.000 001.002.000 001.005.001
Cell 3 : 001.002.000 001.002.000 001.005.001

FIRMWARE:

Core IO
MP-0 : B.004.001.001
ED-0 : 002.011.000
MP-1 : B.004.001.001
ED-1 : 002.011.000

Cell 0
PDHC : B.023.003.040 - Active
PDHC : B.023.003.040
IPF_FW : 009.048.000 - Active
IPF_FW : 009.022.000
Cell 1
PDHC : B.023.003.040 - Active
PDHC : B.023.003.040
IPF_FW : 009.048.000 - Active
IPF_FW : 009.022.000
Cell 2
PDHC : B.023.003.040 - Active
PDHC : B.023.003.040
IPF_FW : 009.048.000 - Active
IPF_FW : 009.022.000
Cell 3
PDHC : B.023.003.040 - Active
PDHC : B.023.003.040
IPF_FW : 009.048.000 - Active
IPF_FW : 009.022.000


IO Cabinet FPGA and Firmware revision report

PROGRAMMABLE HARDWARE :

System Backplane : GPM EMMUX
----------- -----------
001.002.000 001.000.000

IO Backplane : IO_LPM-0 IO_LPM-1
----------- -----------
001.004.000 001.004.000

Core IO : CIO-0 CIO-1
----------- -----------
001.002.000 001.002.000
FIRMWARE:

Core IO
MP-0 : B.004.001.001
ED-0 : 002.011.000
MP-1 : B.004.001.001
ED-1 : 002.011.000


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!