Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware upgrade to E0.2.26 for HP rx 2600

 
GNJ
Advisor

Firmware upgrade to E0.2.26 for HP rx 2600

Can you Please help me in getting this
firmware upgrade?
As it is not Available in HP site. Please
attach the same if somebody have this?


Thanks & Regards
Jayakrishnan G Naik
7 REPLIES 7
Matti_Kurkela
Honored Contributor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

The location of firmwares on the HP web site has changed.
The rp and rx server firmwares are now available in http://www.hp.com/go/support (Select "Download drivers and software", type in "rx2600", then select your OS version on the next page).

The current firmware is now 02.31B. Would this be OK, or do you specifically need the old version?

This page seems to have the most detailed information about what's changed between 0.2.26 and 0.2.31:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=447335&swItem=ux-46489-1&prodNameId=88839&swEnvOID=7&swLang=13&taskId=135&mode=4&idx=1

MK
MK
Torsten.
Acclaimed Contributor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

Hi,

the E0.2.26 version is very old, from 2003.

The current version is

VERSION: System 02.31, BMC 01.53, and iLO MP E.03.30

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=447335&swItem=ux-46489-1&prodNameId=88839&swEnvOID=54&swLang=13&taskId=135&mode=4&idx=1

Read and follow the release notes!



All previous versions you need are here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=447335&swItem=ux-27066-1&prodNameId=88839&swEnvOID=54&swLang=13&taskId=135&mode=5

» Version: E.03.15 (FTP) (7 Jul 2005)

» Version: E.03.13 (FTP) (31 Jan 2005)

» Version: E.02.29 (FTP) (24 Jun 2004)

» Version: E.02.26 (9 Dec 2003)

» Version: E.02.10 (1 Oct 2002)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
mits
Respected Contributor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

Firmware is available at the link below.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ns-13752-3&jumpid=reg_R1002_USEN

You can search this firmware fromwww.hp.com by using the keyword, e.02.26.

-> Management Processor Card Firmware - HP Business Support Center
Version E.02.26 - Management Processor Card Firmware
Jeffrey Heneks_2
Occasional Advisor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

The response center told me that there is supposed to be a new rx2600 firmware upgrade coming out. They said in two weeks, two weeks ago. I haven't been able to comfirm this. We are having a problem with a fan going marginal and the system tells one of the redundant power supplies to turn off to reduce the heat load. The response center tells me this is because the firmware is marking the fan as marginal because the threashold is too high and the new firmware will relax the criteria.

Can anyone confirm this?
Jeffrey Heneks_2
Occasional Advisor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

I forgot to mention that our problem only happens a couple of minutes at a time. The power supply turns off, a couple minutes later the fan goes back up to normal speed, the system turns the power supply back on.

Some days it doesn't happen at all, some days three or four times.

I want to know if I should wait for this firmware or just go ahead and git the fan replaced.
Phil uk
Honored Contributor

Re: Firmware upgrade to E0.2.26 for HP rx 2600

Something to Note:
E.02.26 (MP Firmware), This image Increases the size of the allowed firmware image.
Therefore I suspect that it will be the case that you will to upgrade to this version BEFORE you plan to upgrade to a more current version.

There is a similar rule that applies to RP3440's (E.02.29 - i think from memory).
So again, you need to upgrade to these versions as a "stepping stone" before you upgrade to a more current version.
Phil uk
Honored Contributor

Re: Firmware upgrade to E0.2.26 for HP rx 2600