Flashing RED System Health LED

[maxell_1]

I have few rx2660 servers.

Does anyone know why my server's system
health LED keep on flashing RED whenever the server is switched off and on again. The server
will only boot to EFI.

Thanks

[Jeeshan]

is it RED or AMBER(orange) flashing?

if it's RED then check the MP logs for details.

[SKR_1]

If it is Red then there should be some hardware failure, check MP logs and system events logs.

Thanks

SKR

[maxell_1]

Is it always that RED means hardware failure or there can be other sources of failure?

[cnb]

Hi,

This may help for full explanation of LEDs:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01163996/c01163996.pdf

See Chapter 5.

HTH,

[yulianto piyut]

check the error log at MP first, maybe is hardware failure if flashing RED is on.

[sujit kumar singh]

this is a Hardwareissue and the MP system logs need to be analysed fpr pin pointing the problem, Can be System Board CPUs etc.



Need to send the MP logs to Hardware guy having the tools to analyze the MP logs.



Regards
Sujit

Sujit