Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 2660 video display

 
SOLVED
Go to solution
Jonathan Grymes
Frequent Advisor

HP 2660 video display

New server came with video card. However, attaching video cable to VGA port only returns this to the monitor:
"Console is on a serial device. No further output will appear on this output device."

Not sure where to start to debug this one. Tried two different monitors with same result.
HP 2660 Itanium with HPUX 11i V2. The server was specifically ordered with a video card.
3 REPLIES 3
cnb
Honored Contributor
Solution

Re: HP 2660 video display

Hi,

You;ll need to tell the system to use the VGA port. See page 73:

http://www.docs.hp.com/en/5992-4044/5992-4044.pdf

Rgds,

Robert-Jan Goossens
Honored Contributor

Re: HP 2660 video display

Hi Jonathan,

Have a look at this doc.

Title: HP Integrity rx2660, rx3600, and rx6600 Servers - How Is Console Output Configured?
Document ID: emr_na-c01479528-1

http://www13.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c01479528

Regards,
Robert-Jan
Mohamed_Ali
Occasional Visitor

Re: HP 2660 video display

Hi,

 

"Console is on a serial device. No further output will appear on this output device."

 

This happened because no keyboard detected at boot up. connect a keyboard and reboot the machine, the output will display properly.