Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP BL860i2 in c7000, cannot connect to iLO, even after reset

 
Highlighted
steribm
Occasional Contributor

HP BL860i2 in c7000, cannot connect to iLO, even after reset

I couldn't get the "telnet" sessions to clear (nobody was even using the device) so I couldn't bring up a serial console to perform a reinstall. So I tried to power it down (press and hold)... but that did not work. So I logged into the OA via SSH and did a "reset server 7" (ours is in the double high at 7). I've tried resetting it this way now many times... yet now iLO cannot be used... it just hangs indefintely (web page just hangs). Any ideas on how to solve this?
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: HP BL860i2 in c7000, cannot connect to iLO, even after reset

What OA version is running?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
steribm
Occasional Contributor

Re: HP BL860i2 in c7000, cannot connect to iLO, even after reset

Actually... I just wasn't patient enough... not sure how long it takes, but it came back after a very long time (10 minutes or more). So... all is ok. My error.