Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Integrity RX2660 Boot Problem

 
chocoteco
Occasional Visitor

HP Integrity RX2660 Boot Problem

The rx2660 server doesnt have signal video. 

 

The status leds are the next:

 

Power LED : Steady green

External health LED : Steady green

Internal health LED : Steady green

System health LED  : Blink between red and amber. one minute blinks red and the next blinks amber

 

 

 

7 REPLIES 7
S_Logan
HPE Pro

Re: HP Integrity RX2660 Boot Problem

Hi,

 

Please acknowledge and view  the MP SL and FPL Logs.

 

You Can switch to the  MP console by pressing CTRL+B , then login to MP  and  view the logs from MP:CM> prompt

I work for HPE

Accept or Kudo

S_Logan
HPE Pro

Re: HP Integrity RX2660 Boot Problem

Hi,

 

You can capture the SL logs and update here.

 

Let us look in to that

I work for HPE

Accept or Kudo

S_Logan
HPE Pro

Re: HP Integrity RX2660 Boot Problem

Hi 

 

Please find the LED Status as updated:

 

Power LED = Green: full power is ON
System health LED = Flashing amber: warning / Flashing red: system fault
Internal health LED = Green: system health is good
External health LED = Green: system health is good

I work for HPE

Accept or Kudo

chocoteco
Occasional Visitor

Re: HP Integrity RX2660 Boot Problem

I am not be able to see nothing in the monitor... No signal video and not signal in the VGA port (console output).  

It has been tried with two different monitors. 

 

iLO 2 MP LAN heartbeat 

Standby power LED 

BMC heartbeat   are blinking normally. 

S_Logan
HPE Pro

Re: HP Integrity RX2660 Boot Problem

Hi 

 

Hope the display configured to VGA port. Normally it should be connected to Serial console to view the MP Logs.

 

If you power recycle , are able to see few startup screens?

I work for HPE

Accept or Kudo