Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP RX2660 CONSOLE TO VGA

 
HP RX4640
Frequent Advisor

HP RX2660 CONSOLE TO VGA

Hello,

I can not figure out how to switch my rx2660 from the consold to the VGA port and set the VGA as primary?
3 REPLIES 3
Michal Kapalka (mikap)
Honored Contributor

Re: HP RX2660 CONSOLE TO VGA

hi,

folow this link from HP :

"Selecting your HP-UX console for Itanium-based systems"

http://docs.hp.com/en/5992-6552/ch04s06.html


mikap
Steve Reece_3
Trusted Contributor

Re: HP RX2660 CONSOLE TO VGA

you don't mention which OS you're using Jim.
With VMS, you need to select the option from the VMS boot menu.
HOWEVER
Bear in mind that it's only VMS 8.3-1H1 that gave you console on the VGA and it locks out the iLO console since the OPA0: device got redirected. In other words, think carefully before you do it!

Steve
Torsten.
Acclaimed Contributor

Re: HP RX2660 CONSOLE TO VGA

Go to EFI shell and use conconfig command.

But remember, you will have NO remote access to console via MP then.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!