HP SIM -> rx2660

[Navi_PT]

Hello,

I have a lot of server Integrity Errors, yesterday I instal the HP SIM, now i can see the status of my servers on HPSIM.

Can i get this informations by SNMP?

The compaq OID is 1.3.6.1.4.1.232. i cant get it in getif our mib browser...

Anyone can help me, plz? My OS is hp-ux 11.23

Thx

[Torsten.]

The HP-UX server <-> HP SIM communication works via WBEM, follow the SIM managed system guide to get this work. Meanwhile you can check the status via STM or system management homepage (smh).

[Navi_PT]

So... After this the STNMP will work?

Thx a lot

[Torsten.]

Two different things - the server can do SNMP, but the communication to HP SIM is via WBEM, a similar, but different protocol.

[Navi_PT]

Hum... but i need the server info  (FAns, Disk, etc..) by the SNMP protocol, but i cant get the OID from compaq...

Can you help plz?

Thx

[Torsten.]

In order to monitor the server with HP SIM, you have to switch from STM to SFM, then the WBEM providers will inform HP SIM about problems. You can also check with SMH. Check the guide!

[Navi_PT]

Ok! Thx torsten. I will try  your solution and the net-snmp. I think net-snmp its more easy and is extensible to others agent's. 

Thx

[Torsten.]

It really depends on what you want to do.

If you want to monitor this server only, use the SMH:

http://server-ip:2301

HP SIM can monitor a huge range of products (not only hp) and in combination with insight remote support it opens automatically a hardware case at hp support, it checks if your contracts are still valid ... etc...

[Navi_PT]

Yes.

But i have other server that collect the info from others servers by SNMP, and my server of hp rx2660 i cant see the oid of compaq :S

[Navi_PT]

I see o lof of OID on GETif but cant see the

The compaq enterprise               (1.3.6.1.4.1.232)