Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM -> rx2660

 
Navi_PT
Occasional Advisor

HP SIM -> rx2660

Hello,

 

I have a lot of server Integrity Errors, yesterday I instal the HP SIM, now i can see the status of my servers on HPSIM.

Can i get this informations by SNMP?

 

The compaq OID is 1.3.6.1.4.1.232. i cant get it in getif our mib browser...

 

Anyone can help me, plz? My OS is hp-ux 11.23

 

Thx

 

13 REPLIES 13
Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

The HP-UX server <-> HP SIM communication works via WBEM, follow the SIM managed system guide to get this work. Meanwhile you can check the status via STM or system management homepage (smh).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

So... After this the STNMP will work?

 

Thx a lot

Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

Two different things - the server can do SNMP, but the communication to HP SIM is via WBEM, a similar, but different protocol.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

Hum... but i need the server info  (FAns, Disk, etc..) by the SNMP protocol, but i cant get the OID from compaq...

Can you help plz?

 

Thx

Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

In order to monitor the server with HP SIM, you have to switch from STM to SFM, then the WBEM providers will inform HP SIM about problems. You can also check with SMH. Check the guide!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

Ok! Thx torsten. I will try  your solution and the net-snmp. I think net-snmp its more easy and is extensible to others agent's. 

 

Thx

Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

It really depends on what you want to do.

 

If you want to monitor this server only, use the SMH:

 

http://server-ip:2301

 

HP SIM can monitor a huge range of products (not only hp) and in combination with insight remote support it opens automatically a hardware case at hp support, it checks if your contracts are still valid ... etc...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

Yes.

But i have other server that collect the info from others servers by SNMP, and my server of hp rx2660 i cant see the oid of compaq :S

Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

I see o lof of OID on GETif but cant see the

The compaq enterprise               (1.3.6.1.4.1.232)

Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

I really need help to configue my hp servers to other server see the status of my hp server by snmp...

Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

I don't know for sure, but I think you cannot get a compaq OID from this server, it provides the values ander the hewlett-packard tree.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Navi_PT
Occasional Advisor

Re: HP SIM -> rx2660

Hello,

 

And good year of 2012

 

I can get this:

- <hp title="ComputerSystem">
  1.3.6.1.4.1.11.2.3.1.1
  <hp title="sysUpTime">1.3.6.1.4.1.11.2.3.1.1.1</hp>
  <hp title="sysUsers">1.3.6.1.4.1.11.2.3.1.1.2</hp>
  <hp title="sysAvgJobs1">1.3.6.1.4.1.11.2.3.1.1.3</hp>
  <hp title="sysAvgJobs5">1.3.6.1.4.1.11.2.3.1.1.4</hp>
  <hp title="sysAvgJobs15">1.3.6.1.4.1.11.2.3.1.1.5</hp>
  <hp title="sysMaxProcess">1.3.6.1.4.1.11.2.3.1.1.6</hp>
  <hp title="sysFreeMemory">1.3.6.1.4.1.11.2.3.1.1.7</hp>
  <hp title="sysPhysMemory">1.3.6.1.4.1.11.2.3.1.1.8</hp>
  <hp title="sysMaxUserMemory">1.3.6.1.4.1.11.2.3.1.1.9</hp>
  <hp title="sysSwapConfig">1.3.6.1.4.1.11.2.3.1.1.10</hp>
  <hp title="sysEnabledSwap">1.3.6.1.4.1.11.2.3.1.1.11</hp>
  <hp title="sysFreeSwap">1.3.6.1.4.1.11.2.3.1.1.12</hp>
  <hp title="sysUserCPU">1.3.6.1.4.1.11.2.3.1.1.13</hp>
  <hp title="sysSysCPU">1.3.6.1.4.1.11.2.3.1.1.14</hp>
  <hp title="sysIdleCPU">1.3.6.1.4.1.11.2.3.1.1.15</hp>
  <hp title="sysNiceCPU">1.3.6.1.4.1.11.2.3.1.1.16</hp>

 

But i need the power , the fan's... this can't find...

Torsten.
Acclaimed Contributor

Re: HP SIM -> rx2660

I don't know about ... but can you do a snmpwalk on the iLO?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!