Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX boot issue

 
SOLVED
Go to solution
bchinnat
Frequent Advisor

HP-UX boot issue

we have HP-UX rx2620 which was running fine upto last week(11.23). Suddenly it was in hung state I had reset from console and after that it came to the shell> prompt. From there I am not able to boot and not finding fsx: as well

Shell> map
Device mapping table
blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)


Shell> info -a all
BOOTABLE DEVICES

Order Media Type Path
----- ---------- ---------------------------------------

[empty]


So how to conclude this, whether the OS crashed or we need to create fs to boot the server.

Thanks in Advance.

5 REPLIES 5
melvyn burnard
Honored Contributor
Solution

Re: HP-UX boot issue

looks like it cannot see any diss.
I woul dcheck your physical disks, (assuming you are using internal disks) or the I/O card
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
bchinnat
Frequent Advisor

Re: HP-UX boot issue

It's Internal SCSI disks..
SoorajCleris
Honored Contributor

Re: HP-UX boot issue

Hi ,

If you have boot disk, it will give you output,

Shell> map -r

Fs0 and fs1

Currently there is no boot device detected.

Regards,
Sooraj
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie
bchinnat
Frequent Advisor

Re: HP-UX boot issue

Thanks for all your replies..
Boot disk went faulty..
bchinnat
Frequent Advisor

Re: HP-UX boot issue

thanks..