HPE Community
Integrity Servers
1753518 Members
5274 Online
108795 Solutions
New Discussion юеВ

HP rx2620 boot issue

 
SOLVED
Go to solution
PonTsuyoshi
Visitor

тАО03-10-2016 06:48 PM

тАО03-10-2016 06:48 PM

HP rx2620 boot issue

Hello.

We have HP rx2620 server that is stuck on startup.
After some time, appears:
"BC was not started. BC was not started."

Is there any way to fix the issue?

We have already replaced button cell.
But it did not change anything.


Thank you

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО03-11-2016 03:09 AM

тАО03-11-2016 03:09 AM

Solution

Re: HP rx2620 boot issue

You can try to pull the power plug for some minutes ... otherwise the board is faulty.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
PonTsuyoshi
Visitor

тАО03-13-2016 06:31 PM

тАО03-13-2016 06:31 PM

Re: HP rx2620 boot issue

Hello, Torsten.

 

Thank you for your help. 

We tried to pull out power plug for some minutes and boot the server,however, it didn't change the state.

The board must be failed and cannot work.

We will purchase another server.

Thanks for your help,

 

Tsuyoshi

 

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.