HP rx5670 with SmartArray 431

[Reuven_5]

Hello
I need help to find out if it is posible to install Compaq SmartArray 431 on the HR rx5670 Itanium 2 Server . The Server see it in the PCI list , but i can't find anywhere how can i integrate it to the EFI , that it will be posible to boot from it ...
Please advice , I stugeling with it for couple of days and nothing . :(
Thanks

[Sameer_Nirmal]

Hi,

The supported options for SA on rx5670 are dependent on the OS to be used.
You can verify at
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=88844〈=en&cc=us&taskId=135&prodSeriesId=447334&prodTypeId=15351


The SAs supported by the HP 9000/Integrity server are listed in the following support matrix
http://docs.hp.com/en/SM-20050510/raidcombinedsupportmatrix.htm


The Firmware requirement for the PCI I/O adapters if you would be using HP-UX

http://docs.hp.com/en/5449/System_Firmware_Matrix_4-8.html


Take a look at the supported options for rx5670
http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000079788102

I don't see support for SA431 on this server for an OS.