HPE Community
Integrity Servers
1753560 Members
5534 Online
108796 Solutions
New Discussion юеВ

HPUX Integrity filesystem expansion on guest

 
SOLVED
Go to solution
donald evans
Occasional Contributor

тАО09-26-2008 10:49 AM

тАО09-26-2008 10:49 AM

HPUX Integrity filesystem expansion on guest

Pretty new to Integrity virtual guest - I have used lvextend on the base to increase /dev/vgVM/rlvol4 which is presented to guest suthpux1 - normally on a hpux I would run the fsadm command to increate the filesystem. I don't see the change on the guest when I run a vgdisplay and I don't see any help in documentation.
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО09-26-2008 11:11 AM

тАО09-26-2008 11:11 AM

Solution

Re: HPUX Integrity filesystem expansion on guest

Better to ask such questions in HP-UX area!

But see

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1270292

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
donald evans
Occasional Contributor

тАО09-26-2008 11:41 AM

тАО09-26-2008 11:41 AM

Re: HPUX Integrity filesystem expansion on guest

Thanks for the information.

Closing thread.
0 Kudos
donald evans
Occasional Contributor

тАО09-26-2008 11:52 AM

тАО09-26-2008 11:52 AM

Re: HPUX Integrity filesystem expansion on guest

Solution was in an existing thead pointed out by another users. Thanks.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.