Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HPUX Integrity filesystem expansion on guest

 
SOLVED
Go to solution
donald evans
Occasional Contributor

HPUX Integrity filesystem expansion on guest

Pretty new to Integrity virtual guest - I have used lvextend on the base to increase /dev/vgVM/rlvol4 which is presented to guest suthpux1 - normally on a hpux I would run the fsadm command to increate the filesystem. I don't see the change on the guest when I run a vgdisplay and I don't see any help in documentation.
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: HPUX Integrity filesystem expansion on guest

Better to ask such questions in HP-UX area!

But see

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1270292

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
donald evans
Occasional Contributor

Re: HPUX Integrity filesystem expansion on guest

Thanks for the information.

Closing thread.
donald evans
Occasional Contributor

Re: HPUX Integrity filesystem expansion on guest

Solution was in an existing thead pointed out by another users. Thanks.