Integrity Servers
1753534 Members
7019 Online
108795 Solutions
New Discussion юеВ

Re: HPUX system is in EFI shell prompt after system rebooted

 
Aungshuman Paul
Regular Advisor

HPUX system is in EFI shell prompt after system rebooted

Hi,

Can anyone help regarding the following issues:

One of my HP-UX 11iv3 system is in EFI shell prompt ( shell>) each time system is rebooted it fail to nomally boot and try to boot from the network and after failed it will go to >shell prompt. Then I need manually choose "boot ftom file" for UP the system. For additional information this is an BL870c blade server.

Aungshu
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HPUX system is in EFI shell prompt after system rebooted

Boot up hp-ux and use "setboot" to adjust the boot entries and automatic boot.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Aungshuman Paul
Regular Advisor

Re: HPUX system is in EFI shell prompt after system rebooted

Thanks for your help. I will acknowledge again when I go to the customer site and sove the issues.


Aunsghu
Basheer_2
Trusted Contributor

Re: HPUX system is in EFI shell prompt after system rebooted

Dear Pual.

type setboot
this will show you your current settings. PRI, HAA, and ALT

Primary bootpath : 0/1/1/0.0.0
HA Alternate bootpath : 0/1/1/0.1.0
Alternate bootpath : 0/1/2/1

Autoboot is ON (enabled)