Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HPUX system question

 
SOLVED
Go to solution
navin
Super Advisor

HPUX system question

Hi ,
One of our server mode rx2660 - stopped working means not responding - with messages /var/adm/inet.sec - has wrong servers - rebooted the box - upon rebooting the box is not rebooting with the below error - any thoughts?

loading section 1
............Error - efi_disk_read returned (Device Error)
offset:0x1fed8000, ma:0xfee2a010, len: 8192
pausing temporarily... 0

Read Error(elf_load):read -1 bytes out of 182208 bytes requested.

loading failed

Thanks Much
Learning ...
5 REPLIES 5
Torsten.
Acclaimed Contributor
Solution

Re: HPUX system question

Dead boot disk?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Kanagaraj
Regular Advisor

Re: HPUX system question

seems boot disk is bad....try to boot from alternative disk..
navin
Super Advisor

Re: HPUX system question

drivs seems to be fine.
And here is the info from sl
637 SFW 0 *3 0x7680002200E033A0 0000000000000002 BOOT_CPU_FAILED
22 Mar 2010 15:29:01
Thanks Much
Learning ...
Patrick Wallek
Honored Contributor

Re: HPUX system question

Open a hardware call with HP support. They should be able to give an answer quickly.
navin
Super Advisor

Re: HPUX system question

Yes patrick - thanks

Learning ...