Integrity Servers
1752671 Members
5419 Online
108789 Solutions
New Discussion юеВ

HPUX11iv2 doesn't detect drive configured in HP smart array P800

 
SamirShrestha
Frequent Advisor

HPUX11iv2 doesn't detect drive configured in HP smart array P800

I'm trying to install HPUX 11iv2 in HP RX3600 server with HP smart array p800(AD335) controller. I've configured RAID(1+0) from array utility of array controller (by pressing F8) and boot the server from HP UX11iv2 core DVD ROM. While trying install OS, Drive could not detected by the OS.The firmware version of P800 controller is 7.18. Media of HPUX 11iv2 used is June2007 Kit. Kindly advise how to make drive detected by OS.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: HPUX11iv2 doesn't detect drive configured in HP smart array P800

HP-UX B.11.23.0712 is minimum, you are using 0706.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
SamirShrestha
Frequent Advisor

Re: HPUX11iv2 doesn't detect drive configured in HP smart array P800

Thanks. IS there any where to download load HPUX11.23 0712 version?

Thanks
hvhari
Esteemed Contributor

Re: HPUX11iv2 doesn't detect drive configured in HP smart array P800

you should have received updated media kit from HP if you are in OS support. You can link your support contract to your ITRC profile and request for media, via Software Update Manager option on the left side, if not received already.
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!