HPE Community
Integrity Servers
1753770 Members
4748 Online
108799 Solutions
New Discussion

Re: Hardware raid on integrity rx2660

 
SOLVED
Go to solution
r2r2
Occasional Contributor

‎07-21-2014 02:16 AM

‎07-21-2014 02:16 AM

Hardware raid on integrity rx2660

I have a server rx2660 with 4HDD with OS "HP-UX".  And, as I understand, don`t have smart array.

 

Is it possible to make a raid without smart array?

0 Kudos
Reply
4 REPLIES 4
Torsten.
Acclaimed Contributor

‎07-21-2014 02:27 AM

‎07-21-2014 02:27 AM

Solution

Re: Hardware raid on integrity rx2660

Yes, you can create two pairs of mirrored disks with the default controller.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
r2r2
Occasional Contributor

‎07-21-2014 06:05 AM - edited ‎07-21-2014 06:09 AM

‎07-21-2014 06:05 AM - edited ‎07-21-2014 06:09 AM

Re: Hardware raid on integrity rx2660

Thank you!

 

And is it possible configure to raid-10?

 

 

0 Kudos
Reply
r2r2
Occasional Contributor

‎07-21-2014 10:51 AM

‎07-21-2014 10:51 AM

Re: Hardware raid on integrity rx2660

I ve already founded out thar controller SAS1068 supports only RAID-1 plus spare function. Is it right?

0 Kudos
Reply
Robert_Jewell
Honored Contributor

‎07-31-2014 02:02 PM

‎07-31-2014 02:02 PM

Re: Hardware raid on integrity rx2660

You can create either a RAID 0 stripe or a RAID 1 mirror (plus a spare) and that is all.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.