Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Help required -Urgent

 
Trng
Super Advisor

Help required -Urgent

Dear All,

Customer has changed rx4640 console setting through EFI .Now no display coming on console connected to VGA Port.i am able to telnet from remote machine.How to reset the console setting in EFI ?


regards
administrator
3 REPLIES 3
sujit kumar singh
Honored Contributor

Re: Help required -Urgent

hi

revert back the settings on the rx4640 to serial console.

perhpas you shall need to access the EFi shell for doing this.


regards
sujit
Torsten.
Acclaimed Contributor

Re: Help required -Urgent

At EFI level you can use all connections as a console.

So go to EFI and use "conconfig".


Note: If console set to VGA, you cannot use the MP to get the hp-ux console from remote!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Steven Schweda
Honored Contributor

Re: Help required -Urgent

> Subject: Help required -Urgent

A Subject which contains a short description
of the subject often works better than one
which says nothing useful.