How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

[Taohung]

Hello everyone
When I typed "ioscan -fnk | more",
the net adapter can be showed.

swinstall -s "OS DVD" , The driver can't be found.

How can I install the driver ?
Thank you !!

[Torsten.]

What does your ioscan show?

According to the following this NIC is not supported for your server:

http://h18004.www1.hp.com/products/quickspecs/12797_div/12797_div.html

[Taohung]

==> According to the following this NIC is not supported for your server:

May be ,or may be not !!
In the BL870c Quickspec , the NC360m can be supported with HPUX 11iv2 , 11iv3 !!
In the BL860c Quickspec , the NC360m can be supported with HPUX 11iv2 , 11iv3 !!
In the HP SellBuilder for Window (SBW) , It shows that " NC360m can be ordered with BL860c & HP-UX 11iv3" .

So, I think that ==> NC360m can be installed with BL860c & HP-UX 11iv2 .

Thank you !!

[Torsten.]

OK, this NIC needs the IEther-00, this should be installed by default.

What does your "ioscan" and "lanscan" say?

How about a "swlist"?

[rick jones]

I suspect that just any old iEther-00 will not suffice, but one that is new enough to have been told about the vendor, product, subvendor and sub-product IDs on the NC360m. So, I would suggest looking for iether patches.