Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

 
Taohung
Frequent Advisor

How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

Hello everyone
When I typed "ioscan -fnk | more",
the net adapter can be showed.

swinstall -s "OS DVD" , The driver can't be found.

How can I install the driver ?
Thank you !!
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

What does your ioscan show?

According to the following this NIC is not supported for your server:

http://h18004.www1.hp.com/products/quickspecs/12797_div/12797_div.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Taohung
Frequent Advisor

Re: How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

==> According to the following this NIC is not supported for your server:

May be ,or may be not !!
In the BL870c Quickspec , the NC360m can be supported with HPUX 11iv2 , 11iv3 !!
In the BL860c Quickspec , the NC360m can be supported with HPUX 11iv2 , 11iv3 !!
In the HP SellBuilder for Window (SBW) , It shows that " NC360m can be ordered with BL860c & HP-UX 11iv3" .

So, I think that ==> NC360m can be installed with BL860c & HP-UX 11iv2 .

Thank you !!
Torsten.
Acclaimed Contributor

Re: How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

OK, this NIC needs the IEther-00, this should be installed by default.

What does your "ioscan" and "lanscan" say?

How about a "swlist"?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
rick jones
Honored Contributor

Re: How can I install nc360m dual-ports ethernet in the BL860c & HP-UX 11iv2

I suspect that just any old iEther-00 will not suffice, but one that is new enough to have been told about the vendor, product, subvendor and sub-product IDs on the NC360m. So, I would suggest looking for iether patches.
there is no rest for the wicked yet the virtuous have no pillows