Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How get MP card info from host

 

How get MP card info from host

Hi,

I forget my MP card name and its ip address, but I can login into host. How can get Mp info from its host box?

Thanks
-- jerry
9 REPLIES 9
Michael Steele_2
Honored Contributor

Re: How get MP card info from host

Hi

From root console control B.

You will have to hook a labtop up, or a terminal, or a lan line into the GSP telnet port.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1138138
Support Fatherhood - Stop Family Law

Re: How get MP card info from host

The problem is I don't get console login,

I can login host box from ssh via network.
and I want to kwon if there are some kinds of commands to list MP card.
Michal Kapalka (mikap)
Honored Contributor

Re: How get MP card info from host

hi,

I forget my MP card name and its ip address, but I can login into host.

= How can you log on to the server via Telnet/SSH ???

How can get Mp info from its host box?

= i think you need to connect via serial console ( laptop or from other server via serial port ), to log in.

mikap

Re: How get MP card info from host


= How can you log on to the server via Telnet/SSH ???

The case is that, I replaced an mp card on my server physically. and the server's IP is configured already there. I also plumb a net cable on mp card and it will get ip address by dhcp, but I don't know what's the ip is, because i don't know the default MP hostname.

The server is located remotely in our IT lab.
So currently, I only can login my server via IP address or hostname. but I don't know how to access MP card, because i don't what its hostname or ip address.



How can get Mp info from its host box?

= i think you need to connect via serial console ( laptop or from other server via serial port ), to log in.
Michal Kapalka (mikap)
Honored Contributor

Re: How get MP card info from host

hi,

at first contact network team, and they will be able to locate the MP card on the newtork layout, because you need to have isolate LAN for MP/GSP or minimum a dedicated VLAN on network, there are some ranges. In the DHCP, should be a reservation fro MAC adress, so you could locate it in your IP scope.

mikap