Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to access P410i HPUX RX2800

 
SOLVED
Go to solution
gsb_2
Regular Advisor

How to access P410i HPUX RX2800

Just got a RX2800 and can't figure out how to get to P410i from the EFI. I have a RX3600 and know how to get to the SAS adapters. I can see the P410i if I do a device command but there is no directory for it under the fs0:

Thanks,
7 REPLIES 7
Torsten.
Acclaimed Contributor

Re: How to access P410i HPUX RX2800

See the chapter

SAS disk setup (page 132)

in User and Service Guide.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
gsb_2
Regular Advisor

Re: How to access P410i HPUX RX2800

I only have fs0: and fs1: and neither recognizes the saupdate command. I do see this with the devices command.
Torsten.
Acclaimed Contributor
Solution

Re: How to access P410i HPUX RX2800

You need to get the tool from web or use the offline diags cd

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
gsb_2
Regular Advisor

Re: How to access P410i HPUX RX2800

I don't see anything on the offline CD that has anything to do with the P410i.
Torsten.
Acclaimed Contributor

Re: How to access P410i HPUX RX2800

saupdate is in smartarray directory on the offline diags cd.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
gsb_2
Regular Advisor

Re: How to access P410i HPUX RX2800

I see it now thanks.
gsb_2
Regular Advisor

Re: How to access P410i HPUX RX2800

saupdate had to be loaded