Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to access windows server 2003 ia-64?

 
kingsan168
Advisor

How to access windows server 2003 ia-64?

Hi,

I finished to install Windows server 2003 ia-64 on integrity server. When boot the server everytime, it allow you to go to SAC.


Computer is booting, SAC started and initialized.

Use the "ch -?" command for information about using channels.
Use the "?" command for general help.

SAC>...
Setup is being restarted.................

EVENT: A new channel has been created. Use "ch -?" for channel help.
Channel: Unattended Setup Channel
SAC>
EVENT: A channel has been closed.
Channel: Unattended Setup Channel
SAC>
EVENT: A new channel has been created. Use "ch -?" for channel help.
Channel: setuplog.txt
SAC>
EVENT: A new channel has been created. Use "ch -?" for channel help.
Channel: setupact.log
SAC>
EVENT: A new channel has been created. Use "ch -?" for channel help.
Channel: setuperr.log
SAC>
EVENT: The CMD command is now available.
SAC>i
Could not retrieve IP Address(es).


I seems in SAC>i command cannot setup the ip address. could you tell me how to config the NIC card with a ip address on HPVM Windows guest?


Thank you for help.
2 REPLIES 2
Thayanidhi
Honored Contributor

Re: How to access windows server 2003 ia-64?

Hi,
I have same issue? could you succeed?

Regds
TT
Attitude (not aptitude) determines altitude.
kris rombauts
Honored Contributor

Re: How to access windows server 2003 ia-64?

Pls specify what version of the Windows installation media you are using (the one delivered by HP (re-install media) or the one from Microsoft ?

Is it Windows 2003 with SP2 slipstreamed in the install media ?

What server model are you installing on ?
There are .pdf documents on the SmartSetup cd and the HP web that might help.

regards, Kris