Integrity Servers
1748150 Members
3671 Online
108758 Solutions
New Discussion

Re: How to active one PDHC in one RX7640

 
Carme Torca
Super Advisor

How to active one PDHC in one RX7640

Hi,

 

I have one rx7640 with this configuracion:

 

CM> sysrev

...


FIRMWARE:

Core IO
  MP-0          :  B.004.002.003
  ED-0          :    002.011.000
  MP-1          :  B.004.002.003
  ED-1          :    002.011.000

Cell 0
  PDHC          :  B.023.003.033 - Active
  PDHC          :  B.023.003.040 - Pending
  IPF_FW        :    007.044.000
  IPF_FW        :    009.066.000 - Active
Cell 1
  PDHC          :  B.023.003.033 - Active
  PDHC          :  B.023.003.040 - Pending
  IPF_FW        :    009.066.000 - Active
  IPF_FW        :    007.048.000

 

How could I active the PDHC B.023.003.040, that is Pending?

 

Thanks a lot of!

Carmen.

 

 

P.S. This thread has been moved from HP-UX > System Administration to Servers > Integrity. - Hp Forum Moderator

Users are not too bad ;-)
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: How to active one PDHC in one RX7640

This is a bit strange, because the active version is bundle 3.1, all other components have bundle 4.2 installed.

 

Maybe someone forgot a reset or power cycle during the update?

 

You should power cycle the complete system.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Carme Torca
Super Advisor

Re: How to active one PDHC in one RX7640

 

HI,

Yes. We shutdown all the lpars, put OFF the cells and start all again...

Users are not too bad ;-)