How to change partition name's on rx7640 ?

[Jerry_109]

ia64 hp server rx7640
##########################

MP> co

Partitions available:

# Name
--- ----
0) Partition 0 - UX
1) Partition 1 - UX
Q) Quit

[Hasan Atasoy · Accepted solution]

hi jerry ;

please look at document

http://docs.hp.com/en/5991-1247B/ch06s08.html#aes-npar-336


Hasan.

[sujit kumar singh]

hello,


With the NPAR up and running u can do this as far changing only the name of the NPAR is concerned.


from the MP GSP , go to the command menu and give the command as

CM>PD

here u can change the NPAR name in the complex.


or u can also log on to the OS of the NPAR and do a parmodify.

#parmodify -p 0 -P "New_name"


just follow that by a parststus to see of the changes have been made properly.


#parstatus -w
#parstatus -v





this way u can do this.


Regards
Sujit