Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change the SCSI TARGET ID of the addon SCSI Card on RX2600?

 
Wang Xueyan
Advisor

How to change the SCSI TARGET ID of the addon SCSI Card on RX2600?

I'm installing a A4800 SCSI Card on RX2600. "ioscan" can recognize the card. But when I want to change its Controller's ID in EFI shell, I can find it in the output list of the command "devtree" . I dont know what to do next.
2 REPLIES 2
Wang Xueyan
Advisor

Re: How to change the SCSI TARGET ID of the addon SCSI Card on RX2600?

Sorry I mistell the issue.
I'm installing a A4800 SCSI Card on RX2600. "ioscan" can recognize the card. But when I want to change its Controller's ID in EFI shell, I can not find it in the output list of the command "devtree" . I dont know what to do next.
Highlighted
Zygmunt Krawczyk
Honored Contributor

Re: How to change the SCSI TARGET ID of the addon SCSI Card on RX2600?

Hi,

read the doc:
http://h200006.www2.hp.com/bc/docs/support/SupportManual/c00044083/c00044083.pdf

page 65+

This is a doc for rx5670, but idea is the same. Note, that A4800A scsi card is not supported on rx2600. So the card may work or may not.

Regards,
Zygmunt