How to change the SCSI TARGET ID of the addon SCSI Card on RX2600?

[Wang Xueyan]

I'm installing a A4800 SCSI Card on RX2600. "ioscan" can recognize the card. But when I want to change its Controller's ID in EFI shell, I can find it in the output list of the command "devtree" . I dont know what to do next.

[Wang Xueyan]

Sorry I mistell the issue.
I'm installing a A4800 SCSI Card on RX2600. "ioscan" can recognize the card. But when I want to change its Controller's ID in EFI shell, I can not find it in the output list of the command "devtree" . I dont know what to do next.

[Zygmunt Krawczyk]

Hi,

read the doc:
http://h200006.www2.hp.com/bc/docs/support/SupportManual/c00044083/c00044083.pdf

page 65+

This is a doc for rx5670, but idea is the same. Note, that A4800A scsi card is not supported on rx2600. So the card may work or may not.

Regards,
Zygmunt