Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to check if netapp/Emc Luns are detected in PDC/EFI shell.

 
rajeshkm
Occasional Advisor

How to check if netapp/Emc Luns are detected in PDC/EFI shell.

Hi ,

I need to know how to check if netapp/Emc Luns are detected in pa-risc(PDC) and IA(efi-shell).
I can check it by booting os and doing ioscan..But its to much annoying for me.Please give me a solution..
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: How to check if netapp/Emc Luns are detected in PDC/EFI shell.

PDC can only find FC HBAs - no LUNS.

You need to specify the complete path in order to find it.

For EFI you need to toggle the search mode to do a "deep" scan with efiutil.efi.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to check if netapp/Emc Luns are detected in PDC/EFI shell.

See

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1140093

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!