Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure the 6402 controller before installation Linux AS3.0

 
Benny Yeung
Frequent Advisor

How to configure the 6402 controller before installation Linux AS3.0

I will install Linux AS3.0 on rx2620 with controller 6402. The problem is coming, how to configure to RAID before install OS. I have try to press F8 when the machine boot up. But no response!!!!

Please help !!
Benny
3 REPLIES 3
Antoniov.
Honored Contributor

Re: How to configure the 6402 controller before installation Linux AS3.0

Benny,
F8 is typical Pentium based server key. For Itanium server you have to enter into EFI environment.
After power up, you can see on console variuos EFI messages, pressing Enter you can issue username and password, then you type commands.

Antonio Vigliotti
Antonio Maria Vigliotti
Benny Yeung
Frequent Advisor

Re: How to configure the 6402 controller before installation Linux AS3.0

Since, I can press F8 to enter Smart Array Utilites, but it cannot see internal hard drives, please advice how to perfroms a bus scan and intitiates the rebuild???

Thanks!
Benny
Benny
Antoniov.
Honored Contributor

Re: How to configure the 6402 controller before installation Linux AS3.0

Benny,
try posting here
http://forums1.itrc.hp.com/service/forums/familyhome.do?familyId=120

Antonio Vigliotti
Antonio Maria Vigliotti