Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to create two logical drives from same RAID 1+0

byte_83
Occasional Contributor

How to create two logical drives from same RAID 1+0

Hi,

 

I have rx2800i4 server and 2 x 300GB  internal HDDs.As usual ,  when i create RAID 1+0 in EFI, I can only get one logical drive which is 300GB.But i would like to create two logical drives which are 100GB and 200GB from RAID 1+0  as i would like to create two VG00 and VG01. Please advise if any commands or ways to do it. Thanks. 

1 REPLY
Torsten.
Acclaimed Contributor

Re: How to create two logical drives from same RAID 1+0

This is complicated. You can do this, but you need an OS running. During installation of the OS you can only create a single logical drive on the disk. You turn in circles ...

However, IMHO it is not a good idea to have VG00 and VG01 on the same disk anyway.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!