HPE Community
Integrity Servers
1753863 Members
7634 Online
108809 Solutions
New Discussion юеВ

How to from fs0: prompt to shell> prompt in EFI shell?

 
Jerry Jiangwei
Advisor

тАО09-21-2009 07:06 AM

тАО09-21-2009 07:06 AM

How to from fs0: prompt to shell> prompt in EFI shell?

Hi

How to from fs0: prompt to shell> prompt in EFI shell?

Thanks
-- Jerry
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО09-21-2009 07:15 AM

тАО09-21-2009 07:15 AM

Re: How to from fs0: prompt to shell> prompt in EFI shell?

Once on a filessystem, you can change to another, e.g.

fs0> fs1:

If you want to go to Shell> again (why?), exit and return to the shell.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Steven Schweda
Honored Contributor

тАО09-21-2009 12:53 PM

тАО09-21-2009 12:53 PM

Re: How to from fs0: prompt to shell> prompt in EFI shell?

> If you want to go to Shell> again (why?),
> exit and return to the shell.

On my zx2000, exiting the shell ("exit"),
and then returning to the shell ("Please
select a boot option" > "EFI Shell
[Built-in]") returns to the same
(device-name) prompt as before, not back to
the "Shell> " prompt.

Cycling the power, or "Cold Reset" in the
"Boot Option Maintenance Menu" will reset it.
I don't know if anything less drastic will do
it.

That being said, why do you care? Is there
some command which works only at the
"Shell> " prompt? (I know of none.)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.