How to known what model is one server (2-way, dual, single, etc.)

[Carme Torca]

I would like to know if the server is:

*HP Integrity rx4640 (2-way dual core Itanium 2)

*HP Integrity rx4640 (4-way single core Itanium 2)

*HP Integrity rx4640 (4-way dual core Itanium 2)

*HP Integrity rx4640 (8-way single core Itanium 2)


I have this information in the machinfo.

/usr/contrib/bin/machinfo

CPU info:

Number of CPUs = 3

Clock speed = 1600 MHz

Bus speed = 400 MT/s

CPUID registers

vendor information = "GenuineIntel"

processor serial number = 0x0000000000000000

processor version info = 0x000000001f020204

architecture revision: 0

processor family: 31 Intel(R) Itanium 2 Family Processors

processor model: 2 Intel(R) Itanium 2 processor

processor revision: 2 Stepping A2

largest CPUID reg: 4

processor capabilities = 0x0000000000000001

implements long branch: 1

Bus features

implemented = 0xbdf0000060000000

selected = 0x0000000040000000

Bus Lock Signal masked



Cache info:

L1 Instruction: size = 16 KB, associativity = 4

L1 Data: size = 16 KB, associativity = 4

L2 Unified: size = 256 KB, associativity = 8

L3 Unified: size = 9216 KB, associativity = 18



Memory = 8179 MB (7.987305 GB)



#model

ia64 hp server rx4640


Could anyone help me?

Thanks a lot of,
Carmen.

[Torsten. · Accepted solution]

>> processor family: 31 Intel(R) Itanium 2 Family Processors


This is single core.

[Torsten.]

The rx4640 has 4 CPU slots, so it can have up to 4 single core or dual-core CPUs, using dual cores this gives a maximum of 8 cores.

You currently have 3 single core CPUs installed, so there is 1 slot still free.

[Emil Velez]

machinfo should tell you