- Community Home
- >
- Servers and Operating Systems
- >
- Integrity Servers
- >
- Re: How to re-mirror failed disk & how to know sta...
Categories
Company
Local Language
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Community
Resources
Forums
Blogs
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО08-31-2018 08:52 AM
тАО08-31-2018 08:52 AM
How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 server
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО08-31-2018 10:45 AM
тАО08-31-2018 10:45 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
This could be quite easy or really complicated, depends on your config.
Start with posting the output of
# ioscan -fn
Make sure it is readable here in the forum, not a single line or something ...
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО08-31-2018 11:04 PM
тАО08-31-2018 11:04 PM
Re: How to re-mirror failed disk
login: root
Password:
Please wait...checking for disk quotas
(c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of
California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2003 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304 U.S.A.
Rights for non-DOD U.S. Government Departments and Agencies are as set
forth in FAR 52.227-19(c)(1,2).
You have mail.
Value of TERM has been set to "ansi".
WARNING: YOU ARE SUPERUSER !!
# ioscan -fn
Class I H/W Path Driver S/W State H/W Type
Description
===================================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS
System Bus Adapter (1229)
ba 0 0/0 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
tty 0 0/0/1/0 asio0 CLAIMED INTERFACE PCI
SimpleComm (103c1290)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/0/1/1 asio0 CLAIMED INTERFACE PCI
Serial (103c1048)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
OO 0 0/0/2/0 UsbOhci CLAIMED INTERFACE USB
OHCI Interface
OO 3 0/0/2/0.0 UsbMiniBus CLAIMED INTERFACE USB
Composite Device
OO 5 0/0/2/0.0.0 UsbBootKeyboard CLAIMED DEVICE USB
Boot Protocol Keyboard
OO 7 0/0/2/0.0.1 UsbHid CLAIMED DEVICE USB
Human Interface Device
OO 1 0/0/2/1 UsbOhci CLAIMED INTERFACE USB
OHCI Interface
OO 4 0/0/2/1.0 UsbMiniBus CLAIMED INTERFACE USB
Composite Device
OO 6 0/0/2/1.0.0 UsbBootMouse CLAIMED DEVICE USB
Boot Protocol Mouse
OO 2 0/0/2/2 UsbEhci CLAIMED INTERFACE USB
EHCI Interface
sideba 0 0/0/3/0 side_multi CLAIMED INTERFACE CMD
IDE controller
ext_bus 0 0/0/3/0.0 side CLAIMED INTERFACE IDE
Primary Channel
target 0 0/0/3/0.0.0 tgt CLAIMED DEVICE
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE
TEAC DV-28E-N
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/3/0.0.7 tgt CLAIMED DEVICE
ctl 0 0/0/3/0.0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/3/0.1 side CLAIMED INTERFACE IDE
Secondary Channel
target 2 0/0/3/0.1.7 tgt CLAIMED DEVICE
ctl 1 0/0/3/0.1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c1t7d0
graphics 0 0/0/4/0 gvid_core CLAIMED INTERFACE PCI
Display (10025159)
ba 1 0/1 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ext_bus 2 0/1/1/0 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt2
target 3 0/1/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/1/1/1 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt3
target 4 0/1/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 iether CLAIMED INTERFACE HP
AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
lan 1 0/1/2/1 iether CLAIMED INTERFACE HP
AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
ba 2 0/2 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ba 3 0/2/1/0 PCItoPCI CLAIMED BUS_NEXUS
PCItoPCI Bridge
ext_bus 4 0/2/1/0/4/0 ciss CLAIMED INTERFACE
PCI-X SmartArray 6402 RAID Controller
/dev/ciss4
target 5 0/2/1/0/4/0.0 tgt CLAIMED DEVICE
disk 1 0/2/1/0/4/0.0.0 sdisk CLAIMED DEVICE
HP LOGICAL VOLUME
/dev/dsk/c4t0d0 /dev/dsk/c4t0d0s3
/dev/rdsk/c4t0d0s2
/dev/dsk/c4t0d0s1 /dev/rdsk/c4t0d0
/dev/rdsk/c4t0d0s3
/dev/dsk/c4t0d0s2 /dev/rdsk/c4t0d0s1
target 6 0/2/1/0/4/0.7 tgt CLAIMED DEVICE
ctl 4 0/2/1/0/4/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c4t7d0
ba 4 0/3 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
fc 0 0/3/2/0 td CLAIMED INTERFACE HP
Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 0 0/3/2/0.1 fcp CLAIMED INTERFACE FCP
Domain
ext_bus 7 0/3/2/0.1.0.0.0 fcparray CLAIMED
INTERFACE FCP Array Interface
target 8 0/3/2/0.1.0.0.0.0 tgt CLAIMED DEVICE
disk 2 0/3/2/0.1.0.0.0.0.1 sdisk CLAIMED DEVICE
COMPAQ MSA1000 VOLUME
/dev/dsk/c7t0d1 /dev/rdsk/c7t0d1
ext_bus 8 0/3/2/0.1.0.255.0 fcpdev CLAIMED
INTERFACE FCP Device Interface
target 7 0/3/2/0.1.0.255.0.0 tgt CLAIMED DEVICE
ctl 7 0/3/2/0.1.0.255.0.0.0 sctl CLAIMED DEVICE
COMPAQ MSA1000
/dev/rscsi/c8t0d0
ba 5 0/4 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
lan 2 0/4/2/0 igelan CLAIMED INTERFACE HP
A6847-60101 PCI 1000Base-SX Adapter
ba 6 0/5 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ext_bus 5 0/5/1/0 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt5
target 9 0/5/1/0.7 tgt CLAIMED DEVICE
ctl 5 0/5/1/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c5t7d0
ext_bus 6 0/5/1/1 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt6
target 10 0/5/1/1.7 tgt CLAIMED DEVICE
ctl 6 0/5/1/1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c6t7d0
processor 0 120 processor CLAIMED PROCESSOR
Processor
processor 1 121 processor CLAIMED PROCESSOR
Processor
ba 7 250 pdh CLAIMED BUS_NEXUS Core
I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI
Controller
/dev/ipmi
acpi_node 0 250/1 acpi_node CLAIMED INTERFACE Acpi
Hardware
#
--
Confidentiality Notice
The information contained in this electronic
message and any attachments to this message are intended for the exclusive
use of the addressee(s) and may contain confidential or privileged
information. If you are not the intended recipient, please notify the
sender at JSW or System Manager ( admin@jsw.in )
immediately and destroy all copies of this message and any attachments.
Recipients must check this email and its attachments for the presence of
viruses before downloading them. JSW Group accepts no liability for any
damage caused by any virus transmitted by this email.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 01:23 AM
тАО09-01-2018 01:23 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
HP-UX jswcrx1 B.11.23 U ia64 (tc)
login: root
Password:
Please wait...checking for disk quotas
(c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of
California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2003 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304 U.S.A.
Rights for non-DOD U.S. Government Departments and Agencies are as set
forth in FAR 52.227-19(c)(1,2).
You have mail.
Value of TERM has been set to "ansi".
WARNING: YOU ARE SUPERUSER !!
# ioscan -fn
Class I H/W Path Driver S/W State H/W Type
Description
===================================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS
System Bus Adapter (1229)
ba 0 0/0 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
tty 0 0/0/1/0 asio0 CLAIMED INTERFACE PCI
SimpleComm (103c1290)
/dev/diag/mux0 /dev/mux0 /dev/tty0p0
tty 1 0/0/1/1 asio0 CLAIMED INTERFACE PCI
Serial (103c1048)
/dev/GSPdiag1 /dev/mux1 /dev/tty1p2
/dev/diag/mux1 /dev/tty1p0 /dev/tty1p4
OO 0 0/0/2/0 UsbOhci CLAIMED INTERFACE USB
OHCI Interface
OO 3 0/0/2/0.0 UsbMiniBus CLAIMED INTERFACE USB
Composite Device
OO 5 0/0/2/0.0.0 UsbBootKeyboard CLAIMED DEVICE USB
Boot Protocol Keyboard
OO 7 0/0/2/0.0.1 UsbHid CLAIMED DEVICE USB
Human Interface Device
OO 1 0/0/2/1 UsbOhci CLAIMED INTERFACE USB
OHCI Interface
OO 4 0/0/2/1.0 UsbMiniBus CLAIMED INTERFACE USB
Composite Device
OO 6 0/0/2/1.0.0 UsbBootMouse CLAIMED DEVICE USB
Boot Protocol Mouse
OO 2 0/0/2/2 UsbEhci CLAIMED INTERFACE USB
EHCI Interface
sideba 0 0/0/3/0 side_multi CLAIMED INTERFACE CMD
IDE controller
ext_bus 0 0/0/3/0.0 side CLAIMED INTERFACE IDE
Primary Channel
target 0 0/0/3/0.0.0 tgt CLAIMED DEVICE
disk 0 0/0/3/0.0.0.0 sdisk CLAIMED DEVICE
TEAC DV-28E-N
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/3/0.0.7 tgt CLAIMED DEVICE
ctl 0 0/0/3/0.0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c0t7d0
ext_bus 1 0/0/3/0.1 side CLAIMED INTERFACE IDE
Secondary Channel
target 2 0/0/3/0.1.7 tgt CLAIMED DEVICE
ctl 1 0/0/3/0.1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c1t7d0
graphics 0 0/0/4/0 gvid_core CLAIMED INTERFACE PCI
Display (10025159)
ba 1 0/1 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ext_bus 2 0/1/1/0 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt2
target 3 0/1/1/0.7 tgt CLAIMED DEVICE
ctl 2 0/1/1/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c2t7d0
ext_bus 3 0/1/1/1 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt3
target 4 0/1/1/1.7 tgt CLAIMED DEVICE
ctl 3 0/1/1/1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c3t7d0
lan 0 0/1/2/0 iether CLAIMED INTERFACE HP
AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
lan 1 0/1/2/1 iether CLAIMED INTERFACE HP
AB352-60003 PCI/PCI-X 1000Base-T Dual-port Core
ba 2 0/2 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ba 3 0/2/1/0 PCItoPCI CLAIMED BUS_NEXUS
PCItoPCI Bridge
ext_bus 4 0/2/1/0/4/0 ciss CLAIMED INTERFACE
PCI-X SmartArray 6402 RAID Controller
/dev/ciss4
target 5 0/2/1/0/4/0.0 tgt CLAIMED DEVICE
disk 1 0/2/1/0/4/0.0.0 sdisk CLAIMED DEVICE
HP LOGICAL VOLUME
/dev/dsk/c4t0d0 /dev/dsk/c4t0d0s3
/dev/rdsk/c4t0d0s2
/dev/dsk/c4t0d0s1 /dev/rdsk/c4t0d0
/dev/rdsk/c4t0d0s3
/dev/dsk/c4t0d0s2 /dev/rdsk/c4t0d0s1
target 6 0/2/1/0/4/0.7 tgt CLAIMED DEVICE
ctl 4 0/2/1/0/4/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c4t7d0
ba 4 0/3 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
fc 0 0/3/2/0 td CLAIMED INTERFACE HP
Tachyon XL2 Fibre Channel Mass Storage Adapter
/dev/td0
fcp 0 0/3/2/0.1 fcp CLAIMED INTERFACE FCP
Domain
ext_bus 7 0/3/2/0.1.0.0.0 fcparray CLAIMED
INTERFACE FCP Array Interface
target 8 0/3/2/0.1.0.0.0.0 tgt CLAIMED DEVICE
disk 2 0/3/2/0.1.0.0.0.0.1 sdisk CLAIMED DEVICE
COMPAQ MSA1000 VOLUME
/dev/dsk/c7t0d1 /dev/rdsk/c7t0d1
ext_bus 8 0/3/2/0.1.0.255.0 fcpdev CLAIMED
INTERFACE FCP Device Interface
target 7 0/3/2/0.1.0.255.0.0 tgt CLAIMED DEVICE
ctl 7 0/3/2/0.1.0.255.0.0.0 sctl CLAIMED DEVICE
COMPAQ MSA1000
/dev/rscsi/c8t0d0
ba 5 0/4 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
lan 2 0/4/2/0 igelan CLAIMED INTERFACE HP
A6847-60101 PCI 1000Base-SX Adapter
ba 6 0/5 lba CLAIMED BUS_NEXUS
Local PCI-X Bus Adapter (122e)
ext_bus 5 0/5/1/0 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt5
target 9 0/5/1/0.7 tgt CLAIMED DEVICE
ctl 5 0/5/1/0.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c5t7d0
ext_bus 6 0/5/1/1 mpt CLAIMED INTERFACE SCSI
Ultra320 A6961-60011
/dev/mpt6
target 10 0/5/1/1.7 tgt CLAIMED DEVICE
ctl 6 0/5/1/1.7.0 sctl CLAIMED DEVICE
Initiator
/dev/rscsi/c6t7d0
processor 0 120 processor CLAIMED PROCESSOR
Processor
processor 1 121 processor CLAIMED PROCESSOR
Processor
ba 7 250 pdh CLAIMED BUS_NEXUS Core
I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI
Controller
/dev/ipmi
acpi_node 0 250/1 acpi_node CLAIMED INTERFACE Acpi
Hardware
#
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 05:56 AM
тАО09-01-2018 05:56 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
Inside the server or inside the MSA?
What is the result of
# sautil /dev/ciss4
# saconfig /dev/ciss4
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 07:13 AM - last edited on тАО09-03-2018 12:58 AM by Parvez_Admin
тАО09-01-2018 07:13 AM - last edited on тАО09-03-2018 12:58 AM by Parvez_Admin
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
# sautil /dev/ciss4
******************************************************************************
**** ****
**** S A U T I L S u p p o r t U t i l i t y ****
**** ****
**** for the HP SmartArray RAID Controller Family ****
**** ****
**** version A.02.11 ****
**** ****
**** (C) Copyright 2003-2006 Hewlett-Packard Development Company, L.P. ****
******************************************************************************
---- DRIVER INFORMATION ------------------------------------------------------
Driver State........................ READY
---- CONTROLLER INFORMATION --------------------------------------------------
Controller Product Number........... A9890A
Controller Product Name............. HP PCI-X SmartArray 6402
Hardware Path....................... 0/2/1/0/4/0
Serial Number....................... Confidential Info Erased
Device File......................... /dev/ciss4
Hardware Revision................... 'B'
Boot Block Revision................. 5.76
Firmware Revision (running)......... 2.68
Firmware Revision (in ROM).......... 2.68
Firmware Revision (inactive)........ 2.68
# of Logical Drives................. 1
# of Physical Disks Configured...... 2
# of Physical Disks Detected........ 1
Logical Drive Rebuild Priority...... 0 (low)
Array Capacity Expansion Priority... 0 (low)
Auto-Fail Missing Disks at Boot..... disabled
SCSI Transfer Detection Mode........ Auto Detect
---- ARRAY ACCELERATOR (CACHE) INFORMATION -----------------------------------
Array Accelerator Board Present?.... yes
Cache Configuration Status.......... write cache temporarily disabled (code=1)
Cache Ratio......................... 50% Read / 50% Write
Total Cache Size (MB)............... 128
Read Cache........................ 064
Write Cache....................... 064
Transfer Buffer................... 000
Battery Pack Count.................. 2
Battery Status (pack #1)............ FAILED
Battery Status (pack #2)............ FAILED
---- LOGICAL DRIVE SUMMARY ---------------------------------------------------
# RAID Size Status
0 1+0 140007 MB USING INTERIM RECOVERY MODE
---- SCSI DEVICE SUMMARY -----------------------------------------------------
Location Ch ID Type Capacity Status
internal 1 0 DISK 146.8 GB OK
N/A 1 1 N/A N/A FAILED
---- SCSI BUS SUMMARY --------------------------------------------------------
External Internal
Ch LVD_Mode Connector Connector
1 YES - YES
2 YES - -
---- LOGICAL DRIVE 0 ---------------------------------------------------------
Logical Drive Device File........... c4t0d0
Fault Tolerance Mode................ RAID 1+0 (Disk Mirroring)
Logical Drive Size.................. 140007 MB
Logical Drive Status................ USING INTERIM RECOVERY MODE
# of Participating Physical Disks... 2
Participating Physical Disk(s)...... Ch:ID
1: 0
1: 1 <-- NOT RESPONDING
Participating Spare Disk(s)......... Ch:ID
none
Stripe Size......................... 128 KB
Logical Drive Cache Status.......... write cache temporarily disabled (code=1)
Configuration Signature............. 0xA01B7FC7
Media Exchange Detected?............ no
---- SCSI DEVICE 1:0 [DISK] --------------------------------------------------
Connector Location............................... internal
Channel Number................................... 1
SCSI ID.......................................... 0
Device Type...................................... DISK
Disk Capacity.................................... 146.8 GB
Device Status.................................... OK
Device Vendor ID................................. HP 146 G
Device Product ID................................ ST3146707LC
Device Serial Number............................. -
Device Firmware Version.......................... HPC2
SCSI Transfer Rate (actual)...................... Ultra-320
Reserved Area (cfg/status info).................. 557.1 KB (0.6 MB)
Block Size (bytes/sector)........................ 512 bytes
M&P Data Stamped?................................ yes
Last Failure Reason.............................. none
Physical Disk Flags:
Disk present and operational................... yes
Non-disk device detected....................... no
Wide SCSI transfer enabled..................... yes
Synchronous (Fast/Ultra) transfer enabled...... yes
Narrow disk tray detected...................... no
Wide transfer failed, reverted to narrow....... no
Ultra SCSI transfer enabled.................... yes
Ultra-2 SCSI transfer enabled.................. yes
S.M.A.R.T. supported........................... yes
S.M.A.R.T. errors (in factory M&P data)........ no
S.M.A.R.T. enabled............................. yes
S.M.A.R.T. errors (in powerup M&P data)........ no
Attached to external channel................... no
Configured in a logical drive.................. yes
Configured as a spare disk..................... no
Disk write cache enabled at spin up............ no
Running in DT clocking mode.................... yes
Supports DT clocking mode only................. no
Supports DT and ST clocking modes.............. yes
Running in U320 mode........................... yes
Packetized SCSI supported...................... yes
Supports redundant controller operation........ yes
Disk write cache enabled in current page....... no
Disk write cache disabled in default page...... yes
QAS capable (U320 only)........................ yes
Currently running QAS (U320 only).............. yes
---- DIAGRAM OF EXTERNAL CONNECTORS ON BRACKET -------------------------------
========---========
| |
| U320 <--- LOOK FOR THIS LOGO
| / \ |
| <- |
| \ / |
| |
| * * |
| * * * * |
(Ch A1)---> * * * * <--- (Ch A2)
| * * * * |
| * * |
| |
| |
| |
| |
| |
| |
| |
| |
| |
~ ~ ~ ~ ~
******************************************************************************
**** End of SAUTIL Output ****
******************************************************************************
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 07:17 AM
тАО09-01-2018 07:17 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
just replace it, that's it.
check progress with same command.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 07:33 AM
тАО09-01-2018 07:33 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
i already replaced 146GB HDD, aftre replacing it's shows this
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 07:43 AM
тАО09-01-2018 07:43 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
i don't know wether replaced HDD may be faulty
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО09-01-2018 08:12 AM
тАО09-01-2018 08:12 AM
Re: How to re-mirror failed disk & how to know status of the syncing in HP-UX 11i V2 HP rx4640 s
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!