Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to replace disk

 
Md. Farhan A Azam
Trusted Contributor

How to replace disk

Hi Gurus,

I've one RX2660 server with window OS. One HDD is showing amber light & in System Management Homepage its showing in "Smart Array P400 Controller in Slot 4" Status - Failed.
Logical drive is in Mirroring 1+0. So how can i replce the disk, plz suggest.
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: How to replace disk

Pull the disk, insert a new disk and check with saconfig/sautil.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Md. Farhan A Azam
Trusted Contributor

Re: How to replace disk

Hi,

Will this command work in Windows.
Torsten.
Acclaimed Contributor

Re: How to replace disk

Ooops, I didn't see "windows".

However, change the disk and check with ACU.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dennis Handly
Acclaimed Contributor

Re: How to replace disk

>with window OS

Which Windows version?
Md. Farhan A Azam
Trusted Contributor

Re: How to replace disk

Hi,

Windows 2003 with SP2.




kris rombauts
Honored Contributor

Re: How to replace disk

Hi Azam,

the P400 will automatically rebuild the array when you remove the defective disk and insert a new one, this is a controller firmware feature and is independent of the OS running on that server.

In case the rebuild does not start automatically, then you can always start the ACU utility in Windows to see what's wrong i.e. but it should not be necessary under normal circumstances.


HTH

Kris