HPE Community
Integrity Servers
1753943 Members
9110 Online
108811 Solutions
New Discussion юеВ

Re: Hp-ux 11.23 installation on bl860c

 
Bacek
New Member

тАО04-20-2008 02:15 AM

тАО04-20-2008 02:15 AM

Hp-ux 11.23 installation on bl860c

Hello,

is there anyopne who knows why the disk is not visible during Hp-ux installation ?
hp-ux finishes with crash, it seems that it can't find local drive. Usign EFI i've identified the LSI controller and two 72Gb drives, but during the installation it is not visible. Maybe the instalaltion guide will help, but i did not find any usefull information.

Thanks in advance.
0 Kudos
Reply
2 REPLIES 2
Sakui
Frequent Advisor

тАО04-20-2008 02:58 PM

тАО04-20-2008 02:58 PM

Re: Hp-ux 11.23 installation on bl860c


hi Back,

Can you kindly conntect to your Blade Server a nd send the output from the crash. Screen.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-20-2008 09:24 PM

тАО04-20-2008 09:24 PM

Re: Hp-ux 11.23 installation on bl860c

Maybe your hp-ux release is just too old?
What release are you using (check the date)?

BTW, consider to configure an "integrated RAID" on your disks, see

http://docs.hp.com/en/J6369-90071/index.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.