Integrity Servers
1748137 Members
3613 Online
108758 Solutions
New Discussion юеВ

Re: I did a reboot of the server and the server stopped at the Shell> prompt

 
SOLVED
Go to solution
JimKali
Advisor

I did a reboot of the server and the server stopped at the Shell> prompt

I have the following logs at MP

511 SFW 0 2 0x40801CBB00E03220 0000000000000000 BOOT_SWITCH_INSECURE_MODE
24 Sep 2008 19:02:46
510 SFW 0 2 0x5480006300E03200 0000000000000000 BOOT_START
24 Sep 2008 19:02:26
509 SFW 2 0xC148DA8EC20231F0 FFFF000A001D0300 CPU_START_BOOT
24 Sep 2008 19:02:26
508 BMC 2 0x2048DA8EB80231E0 FFFF027000120300 SOFT_RESET
24 Sep 2008 19:02:16
507 SFW 0 2 0x40801CBB00E031C0 0000000000000000 BOOT_SWITCH_INSECURE_MODE
24 Sep 2008 18:52:16
506 SFW 0 2 0x5480006300E031A0 0000000000000000 BOOT_START
24 Sep 2008 18:51:54
505 SFW 2 0xC148DA8C4A023190 FFFF000A001D0300 CPU_START_BOOT
24 Sep 2008 18:51:54
504 BMC 2 0x2048DA8C3B023180 FFFF006FFA220300 ACPI_ON
24 Sep 2008 18:51:39
503 BMC 2 0x2048DA8C3A023170 FFFF027000120300 SOFT_RESET
24 Sep 2008 18:51:38
502 BMC 0 0 0x16801D4A00E03150 0000000000000001 INT_HEALTH_LED_STATE_CHANGE
D
24 Sep 2008 18:51:37
501 BMC 2 0x2048DA8C39023140 0181A37000120300 CHASSIS_CONTROL_REQUEST
24 Sep 2008 18:51:37
500 BMC *3 0x2048DA8C1C023130 FFFF0A6FFA220300 ACPI_SOFT_OFF_OVERRIDE
24 Sep 2008 18:51:08
499 BMC 0 0 0x16801D4A00E03110 0000000000000000 INT_HEALTH_LED_STATE_CHANGE
D
24 Sep 2008 18:51:07
498 BMC 2 0x2048DA8C1B023100 0180A37000120300 CHASSIS_CONTROL_REQUEST
24 Sep 2008 18:51:07

when I do a co i go here
- - - - - - - - - - - - Live Console - - - - - - - - - - - -

Shell>
Shell>
Shell>
7 REPLIES 7
Torsten.
Acclaimed Contributor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

What server model is it?

The log does not look that bad.

Maybe a wrong boot entry - watch the console from the beginning.

You can even boot manually and check the boot settings from running hp-ux:

Shell> map -r

change to fs_: and run efi\hpux\hpux.efi

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JimKali
Advisor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

blk0:\> map -r
Device mapping table
blk0 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr500000E01CC25532,Lun0)
blk1 : Acpi(HWP0002,PNP0A03,200)/Pci(1|0)/Sas(Addr500000E01CC1E512,Lun0)

blk0:\>

Torsten.
Acclaimed Contributor
Solution

Re: I did a reboot of the server and the server stopped at the Shell> prompt

There is no bootable disk in this list.

I still don't know what server it is.

Start over and watch the console!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JimKali
Advisor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

It is a blade server and has two disks...

The console logs shows nothing
R.K. #
Honored Contributor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

Hi JimKali,

Try booting from a CD/DVD.
Use,
#map -r -fs -b
to find the dvd/cd. It will be easy to look for the problem there.

-RK
Don't fix what ain't broke
Trng
Super Advisor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

type "exit" from there and proceed
administrator
JimKali
Advisor

Re: I did a reboot of the server and the server stopped at the Shell> prompt

Done