Integrity Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

 
Paolo_c
Frequent Advisor

ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

Good morning, 

A Failure detected yellow LED is showing on cabinet 0 on one of our HP superdome server SD32B. 

According to the event log below the associated error was caused by correctable single bit   (SBE) 

error which appears to have cleared. However in order to be certain that the error is historical, I would like 

to find a way to reset the LED status from "warning" back to "on" . Could someone tell me whether it would be possible to do this without involving a power cycle on the SuperDome. Would a reset of the ILO achieve this and is it possible to do this without risk of causing any issues/disruption to the associated HP-UX Vpars (running  under HP-UX B.11.31) ?

 

21282 2 SFW 0,1,11 CACHE_CHECK_INFO 04/16/2016 06:17:39 It indicates a cache error occurred and data field contains check info data.

21281 2 SFW 0,1,11 MC_TIMESTAMP 04/16/2016 06:17:39 MC: MC timestamp 21280 2 SFW 0,1,11 PAL_CORRECTED_MC 04/16/2016 06:17:39 CMC: PAL corrected the Machine Check

21279 2 SFW 0,0,2 MEM_SBE_IN_RANK 04/14/2016 23:27:26 A single bit memory error (SBE) was detected

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

Connect to the MP and read the logs (SEL), this will turn the LED off.

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paolo_c
Frequent Advisor

Re: ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

Hi Torsten, 

 

i connected to the MP , scroilled through all the logs but ILO still displaying the same status summary as before. 

 

 

Regards

Paul

Torsten.
Acclaimed Contributor

Re: ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

Did you ssh to the MP?

From there do

   MP MAIN MENU:



         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Event Logs
         FW: Firmware Update
         HE: Help

          X: Exit Connection

MP> sl

    EVENT LOG MENU:

        FPL: Forward Progress Log
        SEL: System Event Log
       LIVE: Live Events
        CLR: Clear FPL and SEL

          Q: Quit

 MP:VW> sel


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Paolo_c
Frequent Advisor

Re: ILO 2 - cabinet 0 failure detected error - HPsuperdome server SD32B

Thankyou for your assistance . The reason I was unable to clear the error through reading the SEL logs was due to the fact there was an underlying problem with one of the memory dimms (in cab 0) which will need to be replaced.