ILO/MP time reset

[uspfoms]

How do I reset the date/time on RX servers ILO/MP?


Thanks

[Murat SULUHAN]

Hi

http://docs.hp.com/en/5991-5984/5991-5984.pdf

HP Integrity and HP 9000
iLO MP Operations Guide

I hope it helps

Best Regards
Murat

[Torsten.]

It depends ... on bigger systems the MP has its own clock, on smaller ones it gets the time from the running system.

[uspfoms]

Thanks for the reply's, I can't find it in the manual, I need to reset it on a RX3600 and a RX1620 the ILO time is hours off from the OS on these servers....

Thanks

[Sameer_Nirmal · Accepted solution]

iLO MP has it's own RTC. As mentioned in the iLO MP manual which says "The iLO 2 MP clock is updated from the BMC/SFW and cannot be modified. The realtime clock is used only when the iLO 2 MP is first powered on or rebooted, until it can obtain the correct date from the BMC."

Saying that you need to set the date/time using EFI shell commands "date" and "time".

[uspfoms]

Thanks